Summary
This section describes the default actions and profile associated with Barcode inspection.
Default Actions
|
Inspection |
Action |
Description/ File Types |
|
Barcode Inspection |
Inspect Master |
Inspect a master file for barcodes. |
|
Inspect Sample |
Inspect a sample file for barcodes. |
|
|
Inspect Master (All Pages) |
Inspect multi-page files or multiple files in the Master panel for barcodes. |
|
|
Inspect Sample (All Pages) |
Inspect multi-page files or multiple files in the Sample panel for barcodes. |
Default Profiles
|
Inspection |
Profile |
Description/ File Types |
|
Barcode Inspection |
Default |
Inspect master or sample files with barcodes in horizontal or vertical orientations. Default will find and grade/decode barcodes at 0, 90, 180, 360 degrees (Multiples of 90 degrees) |
|
Rotated |
Inspect master or sample files with rotated barcodes. Rotated will find barcodes oriented outside of those 90 degrees multiples. |
Note: At 300 dpi, the magnification tolerance is 1% and BWR tolerance is 0.01mm.
As a rule, increase the Resolution (Measurements) in Barcode Profile Settings for Default Barcode profile, to a higher dpi value, to get more accurate results.