Text Inspection - Post Inspection Tools

Summary

This section describes the Post-inspection tools needed to inspect any file after running a text inspection.

Post Inspection Tools

Resync

Click the Resync Tool icon to remove an undesired difference that is an identical match between the Master and Sample from the inspection results.

To resync a difference:

• Click the Underline Text icon underneath the Master panel and click and drag the crosshairs to select the difference in question. The text gets underlined in blue.

Alternatively,

• Right-click on the difference in the Difference List and choose Select on master in the menu that pops up. The text in question gets underlined in blue.

Note: If there is a match on the Sample, it shows up in the Resync panel that appears. Clicking a match zooms in on that selection on the Sample to be highlighted.

• Repeat either process for the Sample panel to highlight the same text.

• Click the Resync Text icon. The difference is removed from the Difference List and the number of differences detected is re-numbered.

Note: If the differences are not identical, the difference type gets reclassified as Change and does not get removed; A resynched difference can also not be undone. The inspection must be rerun to get it back.

To clear a selection:

• Right-click on the text underlined in blue.

• Select either Clear, to clear the underline from the word, or Clear All, to clear all underlines, in the menu that pops up.

Show/Hide

To toggle the appearance of all underlines, cross-outs, or zones on or off in a master or sample file, either before an inspection or after:

• Click the Show/Hide icon.